Reg All R4 Programs Needed Files!! ( 18 Files )

File Registration Batch File Made by R4!
18 Needed Files Provided By R4!! And All For the Purpose,
Of being able to Run All R4 Programs Available.

Its really Simple, Place Files Needed In Correct Location..
All 18 that Come With This Read Me! Then Run The Reg All Batch File
That Also is with the Read Me, for 32 or 64 Bit Windows!!
Depending Which You Have!! Enjoy!! Hope This Helps Many!


===============================================================
---------------------------------------------------------------
WHAT TO DO???? HOW TO GET THEM REGISTERED!!
---------------------------------------------------------------
===============================================================
---------------------------------------------------------------
1st.....
---------------------------------------------------------------
DO YOU HAVE WINDOWS 32 BIT, OR 64 BIT ??

-If your not sure which you have... Right Click 'My Computer'
 And Select Properties!! In There you See your "System Type" !!
 It will say 32-Bit windows, or 64-Bit Windows!! Ok Next Step....


---------------------------------------------------------------
2nd........
---------------------------------------------------------------
COPY AND PASTING THE NEEDED FILES TO THE CORRECT LOCATION/S ??

-Inside the Folder "All R4 Programs Needed Files Here" , That..
 Is with this Read Me, and the Reg Batch Files, Is ALL FILES!!

-Select Them All At Once, And Copy Them All!!

-Goto "C:\WINDOWS\system32\" And Paste All The Files In There!!!

-If You Have 64-Bit Windows, Then After Pasting Them in system32,
 Then Goto "C:\WINDOWS\SysWOW64\" And Paste The Files There Also!!
 So All file Should Be In Both Locations, for 64-Bit Windows!!


---------------------------------------------------------------
3rd..........
---------------------------------------------------------------
NOW YOU JUST RUN THE BATCH FILE I MADE TO REGISTER THE FILES!!!

-Inside the Folder with this Read Me, Is 2 Reg All Batch Files!!
 Labelled According to 32-Bit Windows, And 64-Bit Windows!!

-Now Assuming You Have Put All Files In There Needed Locations...
 You Should be Ready to Register the Files... :)

-If you have 32-Bit Windows, Run the 32-Bit Batch File!!
 But Dont Double Click To Run It... Right Click It, And..
 Select To Run As Adminstrator!

-If you have 64-Bit Windows, Run the 64-Bit Batch File!!
 But Dont Double Click To Run It... Right Click It, And..
 Select To Run As Adminstrator!

-Click OK for all the Pop up Messages telling you,
 The Files Registered Successfully! :)

-If Any Files Say they Failed To Register!! Double Check that,
 The File is where it Should Be, and Run the Batch Reg File Again.


---------------------------------------------------------------
===============================================================
---------------------------------------------------------------
IF YOUR WINDOWS IS NOT INSTALLED TO C: DRIVE ???
---------------------------------------------------------------
THEN STILL DO THE SAME STEPS 1, 2, 3 BUT WITH A FEW CHANGES!!

-Obviously, When You Copy Paste The Files to the Needed,
 Location/s Depending on if you have 32 or 64 Bit Windows...
 You Will Be Pasting them in like, "D:\WINDOWS\system32\"
 
-The Batch Files with this READ ME, are Setup for Reg'n Files,
 On C: Drive Only!! So After Pasting the Needed Files...
 To the Drive Location/s your Running Windows On!! You,
 Cant just then run the Batch File!! Because it will Fail all...
 You Must 1st Change the Batch File you Need to Run!!

-To Change the Batch File to Work for the Drive your Running,
 Windows on, and want to register the Files To! All you need,
 To do is Open the Reg All Batch File with Simple NOTE PAD !!
 And you will See the Register Codes in There!!
 Next Change all the C:\ << Parts of it.. To Match the Drive Letter,
 For the Drive your Windows is On!!

-Thats It, And Then You Can Use To Register The Files for a Operating
 System that is Running on any Drive Letter! C: , D: , E: , ETC.


---------------------------------------------------------------
===============================================================


Thats All There Is To It!!
And With All Files Registered!!!
You Can Run Any And All R4 Programs!!

NOTE: If Programs Stop Working!! Redo This Reg Process!!

http://r4.productionz.ws/